TPMS Reset Guide: 2016-2021 Cadillac CT6 Tire Pressure Sensor Light

Last Updated on November 5, 2020 by Nick

TPMS Reset Guide: 2016-2021 Cadillac CT6 Tire Pressure Sensor Light – The Cadillac CT6 (abbreviation for Cadillac Touring 6) is a luxury car from the US car brand Cadillac. The sedan was formally presented to the public for the first time at the New York International Auto Show (NYIAS) 2015.

On September 5, 2016, the CT6 also came to European dealers. The starting price for the three-liter gasoline engine with a maximum output of 307 kW (417 hp) with turbocharging is € 73,500 in Germany.

TPMS Reset Guide: 2016-2021 Cadillac CT6 Tire Pressure Sensor Light

TPMS Reset Guide: 2016-2021 Cadillac CT6 Tire Pressure Sensor Light

If you replacing a spare tire with a road tire containing the TPMS sensor on your Cadillac CT6, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on your vehicle trim level, here are a few ways to reset the TPMS.

Uplevel Display

Time needed: 7 minutes

You’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System on this model. Follow these steps to do it:

  1. Turn the car in Service Mode

    Press and holds the ENGINE START/STOP button for 5 seconds without touching the brake pedal

  2. Use the ◄ navigation button to move to the left screen

    The button is located on the steering wheel
    change engine oil life tpms light reset

  3. Scroll down to the TIRE PRESSURE menu

    Use the ▲▼ navigation button to scroll the menu

  4. Press and hold the SEL button

    The horn will sound twice and the TIRE LEARNING ACTIVE message will appear on the screen

  5. Start from the driver side front tire, use the TPMS Relearn tool to reset the tpms sensor

    Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor

  6. Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire

    A chirp horn will confirm that the sensor has been reset

  7. Turn off the ignition after you reset the last tire

    The TIRE LEARNING ACTIVE message will disappear

  8. Adjust the tire pressure in all four tires recommended on the tire placard

    Done!

Base Level Display

Just like the previous model, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this model. Here’s how to do it:

  • Press and holds the ENGINE START/STOP button for 5 seconds without touching the brake pedal
  • Press the ◄ navigation button to access the cluster app
  • Select INFO
  • Scroll down to the TIRE PRESSURE menu
  • Press and hold the SEL button until the horn sounds twice to enter the relearn mode
  • Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
  • A horn chirp will confirm that the sensor has been reset
  • Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
  • Turn off the ignition after you reset the last tire
  • Adjust the tire pressure in all four tires recommended on the tire placard

These instructions are based on the Cadillac CT6 owner’s manual. This procedure should apply to the first generation of the Cadillac CT6 (2016 2017 2018 2019 2020 2021 model years). Hopefully, the article TPMS Reset Guide: 2016-2021 Cadillac CT6 Tire Pressure Sensor Light can solve your problem. Good Luck!