How To Reset TPMS Tire Pressure Light on Buick Verano (2012-2017)
Last Updated on November 2, 2020 by Nick
How To Reset TPMS Tire Pressure Light on Buick Verano (2012-2017) – The Buick Verano is a compact car built-in 2011 by the American manufacturer General Motors (GM) in the USA at GM’s Orion plant in Michigan. With the Verano, Buick expanded its range to include a smaller model.
Like the Buick Regal introduced a year earlier, which is based on the Opel Insignia, it showed a clear trend towards smaller cars in the USA. The first-generation production at GM’s Orion plant was discontinued in October 2016.
How To Reset TPMS Tire Pressure Light on Buick Verano (2012-2017)
Time needed: 7 minutes
If you replacing a spare tire with a road tire containing the TPMS sensor on your Buick Verano, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. You’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this model. Follow these instructions to get started:
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
- Press the MENU button repeatedly until you see the VEHICLE INFORMATION MENU on the display
The button is located on the turn signal lever
- Scroll down to the “TIRE PRESSURE” menu
Use the thumbwheel to scroll down
- Press and hold the SET/CLR button to enter the relearn mode
A confirmation message may appear on the display
- Press the SET/CLR button if a confirmation message appears on the screen
The horn will sound twice and the TIRE LEARNING ACTIVE message will appear on the screen
- Start from the driver side front tire, use the TPMS Relearn tool to activate the tpms sensor
Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
A horn chirp will confirm that the sensor has been reset
- Turn off the ignition after you reset the last tire
The TIRE LEARNING ACTIVE message will disappear
- Adjust the tire pressure in all four tires recommended on the tire placard
Done!
These instructions are based on the Buick Verano owner’s manual. This procedure should apply to the first generation of the Buick Verano (2012 2013 2014 2015 2016 2017 model years). Hopefully, the article How To Reset TPMS Tire Pressure Light on Buick Verano (2012-2017) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.
