Easy Way To Reset TPMS Tire Pressure Sensor Light on Buick Lucerne (2007-2011)
Last Updated on November 1, 2020 by Nick
Easy Way To Reset TPMS Tire Pressure Sensor Light on Buick Lucerne (2007-2011) – The Buick Lucerne is a front-wheel-drive sedan made by the American automaker Buick and sold by General Motors from early 2005 to 2011. It was Buick’s top model in those years and as such a successor to Buick Park Avenue.
The Lucerne is based on General Motors’ G platform, which was also used in the 2005 Pontiac Bonneville. The Lucerne is powered by the in-house 3.8-liter V6 engine or the Cadillac Northstar V8, making it the first Buick model powered by an eight-cylinder engine.
Table of Contents
Easy Way To Reset TPMS Tire Pressure Sensor Light on Buick Lucerne (2007-2011)
If you replacing a spare tire with a road tire containing the TPMS sensor on your Buick Lucerne, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.
2007-2010 Models
Time needed: 7 minutes
If you have a 2007 2008 2009 2010 Buick Lucerne, you can reset the TPMS by increasing or decreasing the tire pressure without a tool. Follow these instructions to get started:
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
- Press the VEHICLE INFORMATION button repeatedly until you see LEARN TIRE POSITIONS on the display
The button is located on the instrument panel
- Press and hold the ✓ button to enter the relearn mode
The horn will sound twice and the TIRE LEARNING ACTIVE message will appear on the screen
- Activate the TPMS sensor
Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
A horn chirp will confirm that the sensor has been reset
- Turn off the ignition after you reset the last tire
The TIRE LEARNING ACTIVE message will disappear
- Adjust the tire pressure in all four tires recommended on the tire placard
Done!
2011 Models
Unlike the previous model year, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this 2011 model years. Follow these steps to do it:
- Turn the ignition key to the “ON” position without starting the engine
- Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously until the horn sounds twice
- Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
- A horn chirp will confirm that the sensor has been reset
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
- Turn off the ignition after you reset the last tire
- Adjust the tire pressure in all four tires recommended on the tire placard
These instructions are based on the Buick Lucerne owner’s manual. This procedure should apply to the first generation of the Buick Lucerne (2007 2008 2009 2010 2011 model years). Hopefully, the article Easy Way To Reset TPMS Tire Pressure Sensor Light on Buick Lucerne (2007-2011) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.
