2016-2020 Mazda MX-5 Miata Service Minder Wrench Light Reset

2016-2020 Mazda MX-5 Miata Service Minder Wrench Light Reset – The Mazda MX-5 is a model series of Mazda that included the return of the open two-seater. At the beginning of 2011, it was officially announced that the 900,000th copy had been produced. On Friday, April 22, 2016, the 1,000,000th Mazda MX-5 rolled off the belt in Hiroshima. The MX-5 is the best-selling open two-seater in the world.

In September 2014, the fourth MX-5 generation was unveiled by Mazda: the ND. The design is focused on the so-called Kodo- (soul of motion) design and includes technological skyactiv adaptations (specially developed motors and a chassis with the center of gravity further reduced). With this, a weight reduction of 100 kg was achieved compared to the NC model. The ND is slightly shorter and wider than its predecessor and will be released on the European market in May 2015.

2016-2020 Mazda MX-5 Miata Service Minder Wrench Light Reset

2016-2020 Mazda MX-5 Miata Service Minder Wrench Light Reset

Time needed: 7 minutes.

When the remaining engine oil is low, the Wrench Indicator or Engine Oil Light will appear on the display. The engine oil data must be reset after performed change the engine oil on your vehicle. Follow the instructions below to reset the Wrench Indicator Light on your Mazda MX-5 Miata:

  1. Turn the ignition key to “ON” position without starting the engine

    If your vehicle has a Smart key button, press the START-STOP ENGINE button twice without touching the brake pedal.

  2. Tap APPLICATION menu on the touch screen

    The touch screen is located on the center dash
    Wrench Indicator Engine Oil Reset

  3. Select VEHICLE STATUS MONITOR

    Tap the touch screen to enter the menu

  4. Select MAINTENANCE 

    Tap the touch screen to enter the menu

  5. Select SCHEDULED and then select RESET

    Tap the touch screen to enter the menu

  6. When a confirmation dialog appears, select “YES”  to confirm

    Tap the touch screen to confirm

  7. Next, back to the MAINTENANCE menu and select OIL CHANGE to reset the engine oil data

    The engine oil data must be reset after performed change the engine oil on your vehicle.

  8. Select RESET and select “YES”  to confirm

    Done!

For more details, please watch the following video:

These instructions are based on the Mazda owner’s manual. This procedure should be work on the fourth generation of Mazda MX5 Miata (2016 2017 2018 2019 2020 model years). Hopefully, the article of 2016-2020 Mazda MX-5 Miata Service Minder Wrench Light Reset can solve your problem. Good Luck!

Name
Comment