Ford Everest: How To Reset TPMS Low Tyre Pressure Light (2015-2021)

Last Updated on December 3, 2020 by Nick

Ford Everest: How To Reset TPMS Low Tyre Pressure Light (2015-2021) – The Ford Everest is an SUV model manufactured by Ford since 2003 that replaced the Ford Raider. It is based on the Ford Ranger flatbed truck. In India, the car is known as Ford Endeavor.

The second-generation Everest is based on the third-generation Ranger, introduced in 2011 and developed by Ford’s Australian division. This car is not sold at all in Europe and North America.

Ford Everest How To Reset TPMS Low Tyre Pressure Light (2015-2021)

Ford Everest: How To Reset TPMS Low Tyre Pressure Light (2015-2021)

Time needed: 7 minutes

Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. Here is how to reset the TPMS on 2015 2016 2017 2018 2019 2020 2021 Ford Everest:

  1. Park your vehicle

    Stop the vehicle and turn off the engine

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the START/STOP button once without touching the brake pedal

  4. Press ◄ navigation button to enter the cluster menu

    The button is located on the steering wheel
    change engine oil life light reset

  5. Go to DRIVER ASSIST

    Use the navigation button to scroll and press OK to select

  6. Scroll down and select TYRE MONITOR

    Use the navigation button to scroll

  7. Press and hold the OK button until a confirmation message appear on the screen

    Done!

These instructions are based on the Ford Everest owner’s manual. This procedure should apply to the second generation of Ford Everest (2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Ford Everest: How To Reset TPMS Low Tyre Pressure Light (2015-2021) can solve your problem. Good Luck!