2016-2020 Toyota C-HR Maintenance Required Soon Light Reset

2016-2020 Toyota C-HR Maintenance Required Soon Light Reset – The Toyota C-HR is a crossover SUV that was first presented in 2014 at the Mondial de l’Automobile in Paris as a design study Toyota C-HR Concept. At the IAA 2015 in Frankfurt am Main, a revised version was presented before at the Geneva Motor Show in 2016 was a near-production version. Since the end of September 2016, the vehicle is configurable in January 2017 will be delivered in Germany.

The model is based on Toyota’s TNGA platform. The designation C-HR stands for Coupé High Rider. With the Toyota Verso and the Toyota Corolla, the C-HR has been running since October 2016 in the Turkish factory Toyota Motor Manufacturing Turkey from the tape. In addition to a 1.2-liter gasoline engine with 85 kW (116 hp), the C-HR will come with the familiar from the Toyota Prius, 90 kW (122 hp) gasoline / electric hybrid drive on the market.

2016-2020 Toyota C-HR Maintenance Required Soon Light Reset

2016-2020 Toyota C-HR Maintenance Required Soon Light Reset

Time needed: 7 minutes.

When engine oil needs to replace, the Maintenance Required Soon message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Maintenance Required Light on your Toyota C-HR:

  1. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  2. Press the TRIP button repeatedly until you see or “TRIP A”

    The button is located on the steering
    maintenance required minder reset

  3. Next, turn the ignition “OFF”

    Make sure you are in TRIP A when turning off the ignition!

  4. Press and hold the TRIP button, and turn the ignition key to the “ON” position

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  5. Continue to hold down the TRIP button until “000000” MILES appears on the display and the maintenance light turns off.

    Done!

For more details, please watch the following video:

These instructions are based on the Toyota C-HR owner’s manual. This procedure should apply to the first generation of the Toyota C-HR (2016 2017 2018 2019 2020 model years). Hopefully, the article of 2016-2020 Toyota C-HR Maintenance Required Soon Light Reset useful for you. Good Luck!