How To Reset Tire Pressure Sensor TPMS Light on Toyota C-HR (2018-2021) – The C-HR is a crossover that went into production in the summer of 2016. The C-HR is sold in the Chinese market as the IOZA and is manufactured by the FAW-Toyota joint venture.
The Toyota C-HR first appeared as a concept car at the Mondial de l’automobile de Paris 2014 and was also shown to the public at the 2016 Frankfurt Motor Show. The final version was presented at the Geneva Salon in 2016.
How To Reset Tire Pressure Sensor TPMS Light on Toyota C-HR (2018-2021)
Time needed: 7 minutes.
Tire pressure monitoring system (TPMS) or also known as TPWS on Toyota cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2018 2019 2020 2021 Toyota C-HR, it is necessary to reset the TPMS. Follow these steps to do it:
- Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal
- Go to menu by using the ◄ ► navigation button
The button is located on the steering wheel
- Scroll and select the VEHICLE SETTINGS menu
Press the OK button to enter the menu
- Highlight the SETUP menu
Use the ▲▼ navigation button to find the menu
- Press and hold the OK button until the TPMS light blink 3 times
When initialization completes, the tire pressure warning indicator will blink 3 times.
These instructions are based on the Toyota C-HR owner’s manual. This procedure should apply to the first generation of the Toyota C-HR (2018 2019 2020 2021 model years). Hopefully, the article How To Reset Tire Pressure Sensor TPMS Light on Toyota C-HR (2018-2021) can solve your problem. Good Luck!