2014-2015 Mercedes ML 350 (W166) Oil Service Light Reset

2014-2015 Mercedes ML 350 (W166) Oil Service Light Reset – M-Class always bring comfort equivalent to the sedan, but the bravery and toughness plus typical non asphalt cars. This tradition was again seen in the 3rd generation of the M-Class, Mercedes-Benz ML350 4Matic. Seeing the huge dimensions with a look that is tough is looming power that is able to be produced. Especially after seeing the V6 engine with a capacity of 3,500 cc. Power are able to produce 301 hp at 6,500 rpm engine rev.

Damping and suspension constructions are designed to provide comfort. Like the sedan car ride, so the hole is not too pronounced. The more convenient because all the seats are made of leather. Steering wheel also provide a level of comfort. With an appropriate scale, making it comfortable in the hand. The suspension construction is also able to make the car remained stable during aggressive maneuver though sometimes feels unsteady phenomena.

2014-2015 Mercedes ML 350 (W166) Oil Service Light Reset:

To turning off oil change required light on 2014-2015 Mercedes ML 350 (W166), conform to the following instructions:

  • Close all doors, windows, hood and trunk
  • Turn the ignition to the “on” position, but do not start the engine.
  • Press the down button repeatedly until vehicle milage displayed
  • Hit the left arrow button until “trip” is displayed.
  • Press CALL button and within 1 second press OK
  • When the ASSYST menu appear, select the ASSYST PLUS and confirm with OK button.
  • Scroll down to select CONFIRM SERV and confirm with OK button
  • Select appropriate OIL GRADE being used and press OK
  • Select YES and confirm with OK button.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

For more details, please watch the following video:

This procedure should applies to the third generation of Mercedes ML 350 (W166) (2014, and 2015) models. Hopefully the article of 2014-2015 Mercedes ML 350 (W166) Oil Service Light Reset can solve your problem. Good Luck! 😀

One Comment