TPMS Reset: Vauxhall Vivaro Tyre Pressure Sensor Light (2019-2021) – The Opel Vivaro is a medium-sized Opel van, which has been produced since 2001. Opel Vivaro III was first presented in January 2019.
Unlike its predecessors, the third generation Vivaro is a twin, not Renault Trafic and Nissan, but Citroën Jumpy and Peugeot Expert, as well as Toyota ProAce. The new Vivaro stands out from the three vehicles by its front apron and a different steering wheel.
TPMS Reset: Vauxhall Vivaro Tyre Pressure Sensor Light (2019-2021)
Time needed: 7 minutes.
If you replacing a spare tire with a road tire containing the TPMS sensor on your 2019 2020 2021 Opel or Vauxhall Vivaro, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Here is how to reset the TPMS:
- Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the START/STOP button without touching the brake pedal
- Look for the Tyre Pressure Set button and then press it for 3 seconds
A pop-up message will confirm that the sensor has been reset
These instructions are based on the Vauxhall Vivaro owner’s manual. This procedure should apply to the third generation of the Opel or Vauxhall Vivaro (2019 2020 2021 model years). Hopefully, the article TPMS Reset: Vauxhall Vivaro Tyre Pressure Sensor Light (2019-2021) can solve your problem. Good Luck!