Škoda Enyaq: How To Reset Loss Tyre Pressure Light (2021)
|Last Updated on March 18, 2021 by Nick
Škoda Enyaq: How To Reset Loss Tyre Pressure Light (2021) – The Škoda Enyaq iV is an electric car from the Czech automobile brand Škoda Auto. It is the first production vehicle from Škoda based on the modular electric drive kit (MEB) from Volkswagen AG.
The name “Enyaq” was published in February 2020. The manufacturer presented the production model to the public for the first time on September 1, 2020, in Prague. Production started in November 2020. The first vehicle deliveries are expected in February 2021.
Škoda Enyaq: How To Reset Loss Tyre Pressure Light (2021)
Time needed: 7 minutes
Each time a tyre pressure has been adjusted or change the tyre, you need to reset the Tyre Pressure Monitor System (TPMS). In this 2020 2021 Škoda Enyaq, you can reset Tyre Pressure Monitor using the infotainment display. Here’s how to do it:
- Stop the vehicle and turn off the engine
Make sure your vehicle is in a safe place
- Adjust the cold tire pressure in all four tires recommended on the tire placard on the fuel filler flap
The cold tire is a tire that is not driven more than 3 hours
- Switch on the ignition without starting the engine
If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal
- Press SET button
The button located below the front air vents
- Select VEHICLE SETTINGS menu
Tap the touchscreen to select the menu
- Select TYRES
The Tyre Pressure Monitoring System menu will appear on the display
- Select SET
A confirmation message will appears
- Select CONFIRM to execute the TPMS reset
Done!
These instructions are based on the Škoda Enyaq owner’s manual. This procedure should apply to the first generation of Škoda Enyaq (2020 2021 model years). Hopefully, the article Škoda Enyaq: How To Reset Loss Tyre Pressure Light (2021) can solve your problem. Good Luck!