How To Reset Tire Pressure TPMS Warning Light on Toyota Land Cruiser (2007-2021) – The fifth-generation, the Land Cruiser J20, has been on the market since 2008 and replaces the predecessor J10. In Germany, it was sold as Land Cruiser V8. In other markets, it was Land Cruiser or Land Cruiser 200. The third generation of the Lexus LX is based on it.
The Land Cruiser V8 has double wishbones on the front axle and a rigid axle at the rear. All-wheel drive and six-speed automatic transmission are standard.
How To Reset Tire Pressure TPMS Warning Light on Toyota Land Cruiser (2007-2021)
Time needed: 7 minutes.
If the TPMS warning light appears on your 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Land Cruiser, it is necessary to reset the TPMS. In this generation, your vehicle will be equipped with a TPMS reset button. Follow these steps to do it:
- Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal
- Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.
Each model year has a different button location
- Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.
These instructions are based on the Toyota Land Cruiser owner’s manual. This procedure should apply to the latest generation of the Toyota Land Cruiser (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Tire Pressure TPMS Warning Light on Toyota Land Cruiser (2007-2021) can solve your problem. Good Luck!