How Do I Reset Tire Pressure TPMS Light on Toyota Highlander (2007-2021)

How Do I Reset Tire Pressure TPMS Light on Toyota Highlander (2007-2021) – The Highlander is an SUV from the Toyota brand. It was presented at the New York International Auto Show in 2000 and has been sold in Japan, the USA, and Australia since 2000/2001.

In Australia, it is offered under the name Toyota Kluger, since the Hyundai Terracan runs there under the name Highlander. The series should also be available in Europe from 2021. The Highlander has been on sale in North America since December 2019, with the hybrid following in February 2020.

How Do I Reset Tire Pressure TPMS Light on Toyota Highlander (2007-2021)

How Do I Reset Tire Pressure TPMS Light on Toyota Highlander (2007-2021)

Tire pressure monitoring system (TPMS) or also known as TPWS on Toyota cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Highlander, it is necessary to reset the TPMS. Depending on the vehicle model you have, here are a few ways to reset the TPMS. 

2007-2019 Models

Time needed: 7 minutes.

This is the second and third generation of the Toyota Highlander. In this generation, your vehicle will be equipped with a TPMS reset button. Follow these steps to do it:

  1. Stop the vehicle and turn off the engine

    Tire pressure reset process cannot be done while the vehicle is moving.

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal

  4. Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.

    Each model year has a different button location
    toyota tire pressure tpms light reset

  5. Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.

    Done!

2020-2021 Models

Unlike the previous model year, on this latest model, you have to enter the system menu to reset the TPMS. Follow these steps to do it:

  • Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
  • Start the engine
  • Go to menu by using the ◄ ► navigation button
  • Select the VEHICLE SETTINGS menu and then press and hold the OK button
toyota tire pressure tpms light reset
  • Select TPWS
  • Select SET PRESSURE
  • Press and hold the OK button until the TPMS indicator blinks 3 times
  • Run and drive your car

TPMS calibration process will complete after 30 minutes driving between 25 mph (40 km/h).

These instructions are based on the Toyota Highlander owner’s manual. This procedure should apply to the second, third, and fourth generations of the Toyota Highlander (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How Do I Reset Tire Pressure TPMS Light on Toyota Highlander (2007-2021) can solve your problem. Good Luck!