How To Reset Tire Pressure Sensor TPMS Light on Chevrolet Camaro (2010-2021)
Last Updated on October 16, 2020 by Nick
How To Reset Tire Pressure Sensor TPMS Light on Chevrolet Camaro (2010-2021) – The Chevrolet Camaro is a famous American sports car produced by General Motors’ Chevrolet Motor Division. This car was introduced as a competitor to the Ford Mustang in 1966.
After the model disappeared for a few years, a new generation of the Chevrolet Camaro appeared in 2006. This was successful again and was succeeded by a new generation in 2016.
Table of Contents
How To Reset Tire Pressure Sensor TPMS Light on Chevrolet Camaro (2010-2021)
If you replacing a spare tire with a road tire containing the TPMS sensor on your 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Chevrolet Camaro, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.
2010-2011 Models
Time needed: 7 minutes
If you have a 2010 2011 Camaro, you can reset the TPMS by increasing or decreasing the tire pressure without using tools. Follow these instructions to get started:
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
- Press the MENU button repeatedly until you see the VEHICLE INFORMATION menu on the display
The button is located on the turn signal lever
- Scroll down to the “TIRE PRESSURE” menu
Use the thumbwheel to scroll down
- Press and hold the SET button to enter the relearn mode
The horn will sound twice and the TIRE LEARNING ACTIVE message will appear on the screen
- Activate the TPMS sensor
Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
A horn chirp will confirm that the sensor has been reset
- Turn off the ignition after you reset the last tire
The TIRE LEARNING ACTIVE message will disappear
- Adjust the tire pressure in all four tires recommended on the tire placard
Done!
2012-2015 Models
Unlike the previous model year, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this Camaro 2012 2013 2014 2015 model year. Follow these steps to do it:
- Turn the ignition key to the “ON” position without starting the engine
- Press the MENU button briefly until you see the VEHICLE INFORMATION menu on the display
- Scroll down to the “TIRE PRESSURE” menu
- Press and hold the SET/CLR button until the horn sounds twice
- Start from the driver side front tire, place the Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
- Turn off the ignition after you reset the last tire
- Adjust the tire pressure in all four tires recommended on the tire placard
2016-2021 Models
Just like the previous model, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this latest Camaro model year. Here’s how to do it:
- Press and holds the ENGINE START/STOP button for 5 seconds without touching the brake pedal
- Press the ◄ navigation button to access the cluster applications
- Select INFO
- Scroll down to the TIRE PRESSURE menu
- Press and hold the SEL button to enter the relearn mode
- Start from the driver side front tire, place the Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
- Turn off the ignition after you reset the last tire
- Adjust the tire pressure in all four tires recommended on the tire placard
These instructions are based on the Chevrolet Camaro owner’s manual. This procedure should apply to the fifth and sixth generation of the Chevrolet Camaro (2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Tire Pressure Sensor TPMS Light on Chevrolet Camaro (2010-2021) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.
