Easy Way To Reset Pontiac Vibe TPMS Tire Pressure Sensor Light (2007-2010)

Last Updated on November 14, 2020 by Nick

Easy Way To Reset Pontiac Vibe TPMS Tire Pressure Sensor Light (2007-2010) – The Pontiac Vibe was a Pontiac car model built between 2002 and 2010. The vehicle was co-developed by General Motors and Toyota.

Toyota sold the same model as the Toyota Matrix. Technically, the Vibe and the parallel models are based on the Toyota Corolla’s e-platform.

Easy Way To Reset Pontiac Vibe TPMS Tire Pressure Sensor Light (2007-2010)

Easy Way To Reset Pontiac Vibe TPMS Tire Pressure Sensor Light (2007-2010)

Time needed: 7 minutes

This is the second generation of the Pontiac Vibe. In this generation, your vehicle equipped with a TPMS reset button. Follow these steps to do it:

  1. Stop the vehicle and turn off the engine

    Tire pressure reset process cannot be done while the vehicle is moving.

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the POWER button without touching the brake pedal

  4. Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.

    Each model year has a different button location
    toyota tire pressure tpms light reset

  5. Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.

    Done!

These instructions are based on the Pontiac Vibe owner’s manual. This procedure should apply to the second generation of the Pontiac Vibe (2007 2008 2009 2010 model years). Hopefully, the article Easy Way To Reset Pontiac Vibe TPMS Tire Pressure Sensor Light (2007-2010) can solve your problem. Good Luck!