How Do I Reset Ford Flex TPMS Low Tire Pressure Light (2009-2019)

How Do I Reset Ford Flex TPMS Low Tire Pressure Light (2009-2019) – The Ford Flex is a crossover for the North American market. The first generation Ford Flex was marketed in 2009 as the successor to the Ford Freestar and Ford Taurus X.

The second-generation Ford Flex was launched in 2013 and is a revision of the first generation. This generation also is sold in a luxury version like the Lincoln MKT.

How Do I Reset Ford Flex TPMS Low Tire Pressure Light (2009-2019)

How Do I Reset Ford Flex TPMS Low Tire Pressure Light (2009-2019)

Time needed: 7 minutes.

Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. You’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in the Ford Flex. Follow these steps to do it:

  1. Park your vehicle

    Stop the vehicle and turn off the engine

  2. Press and release the BRAKE pedal

    Ensure fully pressed!

  3. Without starting the engine, turn the ignition key from OFF to the ON position 3 times with the ending in the ON position

    If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position

  4. Press and release the BRAKE pedal

    Ensure fully pressed!

  5. Turn OFF the ignition

    Do not release the key!

  6. Turn the ignition key from OFF to the ON position 3 times with the ending in the ON position

    If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position

  7. You will hear a horn if you do it right

    The horn will sound twice and the TRAIN LEFT FRONT TIRE message will appear on the screen

  8. Start from the driver side front tire, use the TPMS Relearn tool to reset the tpms sensor

    Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor

  9. Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire

    A chirp horn will confirm that the sensor has been reset

  10. Turn off the ignition after you reset the last tire

    The TIRE LEARNING message will disappear

  11. Adjust the tire pressure in all four tires recommended on the tire placard

    Done!

These instructions are based on the Ford Flex owner’s manual. This procedure should apply to the first generation of Ford Flex (2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article How Do I Reset Ford Flex TPMS Low Tire Pressure Light (2009-2019) can solve your problem. Good Luck!