How To Reset Citroën DS3 Low Tyre Pressure Sensor Light (2015-2018)

How To Reset Citroën DS3 Low Tyre Pressure Sensor Light (2015-2018) – The Citroën DS3 is a passenger car made by the French concern PSA. The first generation was the first model to be presented in the DS (Different Spirit) series.

An initial indication of the car was unveiled in early 2009 as the Citroën DS Inside. Following the success of the DS3, Citroën first released the DS4 and DS5 in the following years. From 2015, this is a type of the new brand DS Automobiles that has split off from Citroën.

How To Reset Citroën DS3 Low Tyre Pressure Sensor Light (2015-2018)

How To Reset Citroën DS3 Low Tyre Pressure Sensor Light (2015-2018)

The tyre pressure system must be initialized after an adjustment to the pressure of tyres, and after changing one or more wheels. Depending on your vehicle model year, here are a few ways to reset the tyre under-inflation detection system on 2015 2016 2017 2018 Citroën DS3:

With Audio Display

Time needed: 7 minutes.

You can reset the tire under-inflation detection system through the menu on the audio display. Follow these steps to get started:

  1. Stop the vehicle and turn off the engine

    Tire pressure reset process cannot be done while the vehicle is moving.

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the START/STOP button without touching the brake pedal

  4. Press the MENU button

    The button is located at the bottom of the audio screen

  5. Go to the CONFIGURATION menu

    Use the ▲ or ▼ button to scroll and press the OK button to enter the menu
    peugeot low tyre pressure light reset

  6. Select the DEVINE THE VEHICLE PARAMETERS

    Several menu options will appear

  7. Select the TYRE PRESSURE

    The Reinitialisation option will appear

  8. Select the REINITIALISATION

    A confirmation message will appear

  9. Select YES to execute the TPMS reset

    Done!

With Audio Display 2

  • Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
  • Turn ON the ignition without starting the engine
  • Press the MENU button to access the main menu
  • Go to the VEH CONFIG menu by using the ▲ or ▼ button and press the OK button to enter the menu
  • Select REINIT INFLAT
  • When a confirmation message appears, select YES to execute the TPMS reset

With Touch Screen

  • Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
  • Turn ON the ignition without starting the engine
  • Press the MENU button on the audio display
  • Select the DRIVING menu by tap the screen
citroen tpms tire pressure light reset
  • Select Under-Inflation Initialisation
  • Select Yes to execute the tyre pressure reset

These instructions are based on the Citroën DS3 owner’s manual. This procedure should apply to the first generation of the Citroën DS3 (2015 2016 2017 2018 2019 model years). Hopefully, the article How To Reset Citroën DS3 Low Tyre Pressure Sensor Light (2015-2018) can solve your problem. Good Luck!