2015-2021 Peugeot 2008 Low Tyre Pressure Light Reset Guide

Last Updated on December 16, 2020 by Nick

2015-2021 Peugeot 2008 Low Tyre Pressure Light Reset Guide – The Peugeot 2008 is a car produced from 2013 by the French brand Peugeot. The Peugeot 2008 is a compact crossover SUV launched to succeed the Peugeot 207 SW indirectly.

Peugeot had no plans to release an SW model of the 208. The 300,000 unit was produced in France on June 18, 2015. Three hundred seventy thousand cars have been produced worldwide.

2015-2021 Peugeot 2008 Low Tyre Pressure Light Reset Guide

2015-2021 Peugeot 2008 Low Tyre Pressure Light Reset Guide

The tyre pressure system must be initialized after an adjustment to the pressure of tyres, and after changing one or more wheels. Depending on your vehicle model year, here are a few ways to reset the tyre under-inflation detection system on Peugeot 2008:

With TPMS Button

Time needed: 7 minutes

Follow the instructions below if your vehicle is equipped with a Tyre Pressure Set button. Follow these steps to get started:

  1. Stop the vehicle and turn off the engine

    Tire pressure reset process cannot be done while the vehicle is moving.

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the START/STOP button without touching the brake pedal

  4. Look for the Tyre Pressure Set button and then press it for 3 seconds

    An audible signal will confirm that the sensor has been reset
    peugeot low tyre pressure light reset

With Audio Display

You can also reset tyre pressure via the audio display if your vehicle is equipped with a touch screen. Follow these instructions to do it:

  • Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
  • Turn ON the ignition without starting the engine
  • Press the MENU button
peugeot low tyre pressure light reset
  • Select the DRIVING or VEHICLE menu by tap the screen
  • Select Under-Inflation Initialisation
  • Select Yes to execute the tyre pressure reset

These instructions are based on the Peugeot 2008 owner’s manual. This procedure should apply to the first and second generations of the Peugeot 2008 (2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article 2015-2021 Peugeot 2008 Low Tyre Pressure Light Reset Guide can solve your problem. Good Luck!