How to Retrieve Keyless Entry Keypad Code on Ford Fusion – The Ford Fusion is a mid-size car manufactured by Ford Motor Company for the markets of the North and, in part, South America since 2005. The cars of Ford Fusion and Mercury Milan of 2010 and 2011 models, equipped with 17-inch steel wheel disks, are subject to review. According to representatives of Ford, these vehicles have a defect in the wheel-mounting system.
Ford Fusion is equipped with Keyless Entry System. This feature usually consists of Remote Keyless Entry (RKE) as well as Remote Keyless Ignition (RKI). RKE works to lock or unlock the car door remotely without having to use a key. While RKI allows car owners to start the engine remotely without having to get into the car.
The Easy Way To Retrieve Keyless Entry Door Code on Ford Fusion
Have you lost your factory door code for your Ford car? Don’t worry! I’ll show you how to find the Factory preset Ford Fusion (2013 2014 2015 2016 2017 2018 2019 model years) Securicode Keyless Entry Door Keypad Code. The first thing to get Keyless Entry Door Factory Code you must have 2 programmed keys to do this!
Insert the FIRST KEY in the ignition
Turn to the “on” position but do not start the engine, and wait about 4 seconds
Turn the ignition key to “OFF” position
Take out that key and then insert the SECOND KEY
Turn to the “on” position but do not start the engine, and wait until your factory code show up on the dash screen
If your vehicle equipped with a push-button start ignition:
Place the FIRST smart key fobs into the backup slot inside the center console
For 2013 2015 2016 Ford Fusion, the backup slot located in the inside of the center storage. You should place the key ring at the top with the buttons facing toward the rear.
For 2017 2018 2019 Ford Fusion, the backup slot located in the bottom of the cup holder. You should place the key with the buttons facing upward and the unlock button facing the front of your vehicle.
Press the START/STOP button once (do not start the engine), and wait a few seconds
Press the START/STOP button again to turn the ignition OFF
Take out that key and then place the SECOND smart key fobs
Press the START/STOP button once again (do not start the engine), and wait until your factory code show up on the dash screen
For more details, please watch the following video:
This procedure should work for the latest generation of the Ford Fusion (2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article of How to Retrieve Keyless Entry Keypad Code on Ford Fusion useful for you. Good Luck!