How To Reset Mercury Milan Oil Life Light Oil Change Required Minder – The Mercury Milan is built from mid-2005 to the end of 2010 midsize sedan the US belonging to the Ford company car manufacturer Mercury. The Milan based on the consolidated front-wheel-drive platform CD3. He is priced above the sister model Ford Fusion settled and positioned below the Lincoln MKZ.
From spring 2009, a revised version of the Milan was offered. In addition to slight modifications to the front and rear as well as modifications in the interior, especially the engine range has been realigned. The base engine is now a 2.5-liter four-cylinder engine with 129 kW (175 hp), which is joined as a new unit, a 176 kW (240 hp) strong 3.0-liter V6. A hybrid version with a 2.5-liter four-cylinder with 114 kW (155 hp) and an electric motor was available until the end of 2010.
How To Reset Mercury Milan Oil Life Light Oil Change Required Minder
Time needed: 7 minutes.
If the engine oil life is less than 10%, the Oil Change Required Light will appear on the display. The engine oil life interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Oil Change Required Light on your Mercury Milan:
Turn the ignition key to the “ON” position
Don’t start the engine!
Press the SETUP button repeatedly until you see “OIL LIFE = XXX% HOLD RESET = NEW”
The button is located on the steering wheel
Press and hold the RESET button until “OIL LIFE SET TO 100%” is displayed.
It will reset your oil life monitor and turn the change oil soon reading off.
Turn the ignition off and then start the engine to verify the indicator has been reset
These instructions are based on the Mercury owner’s manual. This procedure should be work on the first generation of Mercury Milan (2009 2010 2011 model years). Hopefully, the article How To Reset Mercury Milan Oil Life Light Oil Change Required Minder can solve your problem. Good Luck!