How To Reset Peugeot 408 Service Indicator Spanner Light (2011-2020)

How To Reset Peugeot 408 Service Indicator Spanner Light (2011-2020) – The Peugeot 408 is offered since April 2010 in China and Brazil sedan of the lower middle class of the French manufacturer Peugeot. The first generation is based on the published in summer 2007 Peugeot 308 with an extended wheelbase, however, in contrast to this is a notchback sedan. In contrast to Europe, models with this body variant are in demand in the lower middle class in China and Brazil.

Parallel to the 408 is since early 2012, the Peugeot 308 available as a notchback in China. The comparable Citroën sister models based on the C4 are also available with a short and long wheelbase (C-Quatre and C-Triomphe). According to Peugeot, there were already more than 30,000 pre-orders when the model was introduced.

How To Reset Peugeot 408 Service Indicator Spanner Light (2011-2020)

How To Reset Peugeot 408 Service Indicator Spanner Light (2011-2020)

Time needed: 7 minutes.

When the next service is due, the Service minder or Spanner light will appear on the display. The service indicator must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Peugeot 408:

  1. Turn the ignition to the OFF position

    Make sure your vehicle is stopped completely

  2. There are 2 buttons on the dash, push and hold the Right one (CHECK button)

    The button is located on the instrument cluster
    Peugeot Service Reset older model

  3. Turn ON the ignition but don’t start the engine; the distance recorder display begins a countdown

    Countdown from 10 will appears on the display

  4. Continue to hold down the button until “0” MILES appears on the display and the maintenance light turns off

    Release the button when the display indicates “=0”

  5. Turn the ignition off and then start the engine to verify the indicator has been reset

    Done!

For more details, please watch the following video:

This tutorial we got from the Peugeot owner’s manual. This procedure should apply to all generations of the Peugeot 408 (2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How To Reset Peugeot 408 Service Indicator Spanner Light (2011-2020) useful for you. Good Luck!