How To Reset Lexus RC 350 Oil Maintenance Required Light (2018-2020)

Last Updated on February 27, 2020 by Nick

How To Reset Lexus RC 350 Oil Maintenance Required Light (2018-2020) – The Lexus RC is a passenger car model of the Japanese car manufacturer Lexus, which has been produced since 2014 and sold since January 2015 in Germany. In 2017 partial improvement for both RC and RC F. Both cars are equipped with “Lexus Safety System +” as standard equipment, and navigation display is increased to 10.3 inches. In addition, “CUSTOM” was added to the drive mode select, and the combination of powertrain, chassis, and air conditioning control became freely available.

The RC 350 has replaced the engine from “2 GR – FSE” to “2 GR – FKS”, improving fuel economy as it is with a powerful and refreshing running. Also, RC 200 t was changed to RC 300 along with the naming rule change. For RC F, blind-spot monitor and rear cross-traffic alert were standardized.

How To Reset Lexus RC 350 Oil Maintenance Required Light (2018-2020)

How To Reset Lexus RC 350 Oil Maintenance Required Light (2018-2020)

Time needed: 7 minutes

When engine oil needs to replace, Oil Maintenance Required message will appear on the display. The maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Maintenance Required Light on your Lexus:

  1. Stop the vehicle and turn the ignition switch to the ON position without starting the engine

    Press the POWER button twice without touching the brake pedal.

  2. Press the [wp-svg-icons icon=”copy” wrap=”i”] button to enter the main menu

    The button is located on the steering wheel
    maintenance required reset button

  3. Select [wp-svg-icons icon=”cog-2″ wrap=”i”] on the multi-information display using the navigation button

    The button is located on the steering wheel
    oil maintenance required light reset button

  4. Scroll down to VEHICLE SETTINGS menu

    Press CENTER navigation button to select it

  5. Scroll down to OIL MAINTENANCE menu

    Press CENTER navigation button to select it

  6. When a confirmation dialog appears, select “YES”

    Press CENTER navigation button to confirm

After resetting the engine Oil Maintenance, you can also reset the SCHEDULED MAINTENANCE on the vehicle setting sub-menu if needed.

For more details, please watch the following video:

https://youtu.be/kUy7cC1CFic

These instructions are based on the Lexus owner’s manual. This procedure should apply to the latest generation of the Lexus RC 350/ 300/ 300h/ F (2018 2019 2020 model years). Hopefully, the article How To Reset Lexus RC 350 Oil Maintenance Required Light (2018-2020) useful for you. Good Luck!

Name
Comment