How To Reset Boss GP-10 Guitar Processor To Factory Settings

How To Reset Boss GP-10 Guitar Processor To Factory Settings – The Boss GP-10GK Guitar Processor is a versatile multi-effects device with an integrated interface, which shows its strengths in connection with the GK-3 pickup from Roland. Expanding the guitar sounds with synthesizer sounds is possible with the GP-10GK as well as influencing them with standard effects (distortion, chorus, flanger, etc.).

The guitar sometimes sounds like a 12-string dreadnought, a harp, or a horn. A unique feature of the BOSS GP-10 is the possibility to change the tuning of the guitar at the push of a button and also save it in the patch.

How To Reset Boss GP-10 Guitar Processor To Factory Settings

How To Reset Boss GP-10 Guitar Processor To Factory Settings

Time needed: 7 minutes.

There are several reasons you need to reset your Boss GP-10 to factory settings, such as when you want to sell it or when a system error. Here’s how the settings stored in the unit can be restored to their default values.

  1. Turn on the unit

    Make sure the unit is in on position

  2. Go to FACTORY RESET by pressing the SYSTEM button repeatedly

    The button is located on the near pedal
    boss settings factory reset

  3. Use the VALUE knob to select the type of settings to be restored to the default settings

    On this menu, you can choose to reset the System or Patch settings

  4. Press the WRITE button

    Press the WRITE button to select

  5. When a confirmation message appears, press the WRITE button again to execute the factory reset

    Done!

These instructions are based on the Boss owner’s manual. Hopefully, the article How To Reset Boss GP-10 Guitar Processor To Factory Settings can solve your problem. Good Luck!