Ford F-Series: How To Reset TPMS Tire Pressure Sensor Light (2008-2020)
Last Updated on November 22, 2020 by Nick
Ford F-Series: How To Reset TPMS Tire Pressure Sensor Light (2008-2020) – In addition to the F-150 to F-350, there has been an F-Super Duty model since the eighth generation, positioned well above this in terms of price. The Ford Super Duty has been its model since the tenth generation, including the F-250 and above.
The second generation of the Super Duty appeared in 2008, together with the visually different F-150 of the twelfth generation. There were the types F-250, F-350, F-450, and F-550.
Table of Contents
Ford F-Series: How To Reset TPMS Tire Pressure Sensor Light (2008-2020)
Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. Depending on the vehicle model year you have, here are a few ways to reset the TPMS on Ford F-Series:
F250 F350 F450 F550 (2008-2009)
Time needed: 7 minutes
You’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System on this model. Follow these steps to do it:
- Park your vehicle
Stop the vehicle and turn off the engine
- Press and release the BRAKE pedal
Ensure fully pressed!
- Without starting the engine, turn the ignition key from OFF to the ON position 3 times with the ending in the ON position
If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position
- Press and release the BRAKE pedal
Ensure fully pressed!
- Turn OFF the ignition
Do not release the key!
- Turn the ignition key from OFF to the ON position 3 times with the ending in the ON position
If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position
- You will hear a horn if you do it right
The horn will sound twice and the TRAIN LEFT FRONT TIRE message will appear on the screen
- Start from the driver side front tire, use the TPMS Relearn tool to reset the tpms sensor
Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
A chirp horn will confirm that the sensor has been reset
- Turn off the ignition after you reset the last tire
The TIRE LEARNING message will disappear
- Adjust the tire pressure in all four tires recommended on the tire placard
Done!
F250 F350 F450 F550 (2010-2020)
In this latest generation, you can reset the TPMS without tools by simply increasing or decreasing the tire pressure. Follow these steps to get started:
- Drive your car for at least two minutes between 20 mph
- Stop the vehicle and turn off the engine
- Turn ON the ignition without starting the engine
- Turn the hazard flashers ON then OFF 3 times within 10 seconds
- If you successfully enter the reset mode, the horn will sound indicating the TPMS matching process has started
- Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds
- A horn chirp will confirm that the sensor has been reset
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
- Turn off the ignition after you reset the last tire
- Adjust the tire pressure in all four tires recommended on the tire placard
These instructions are based on the Ford F-Series owner’s manual. This procedure should apply to the twelfth and thirteenth generations of Ford F250 F350 F450 F550 (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Ford F-Series: How To Reset TPMS Tire Pressure Sensor Light (2008-2020) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.
