2017-2020 Fiat 124 Spider TPMS Tire Pressure Warning Light Reset Guide – The Fiat 124 Spider is a rear-wheel-drive roadster from Fiat, first presented by FCA at the 2015 LA Auto Show. The model name and body design strongly refer to the Pininfarina-designed Fiat 124 Sport Spider, which was produced from 1966 to 1985.
The car is based mainly on Mazda MX-5 roadster’s fourth generation and is built on the same production line at Mazda’s Hiroshima plant. The 124 shares underbody, interior, windows, and roof with the MX-5 but has a Fiat-designed and built Multiair turbo engine.
When a system fault is detected, the Tyre Pressure System (TPMS) Light will flash on the display. You need to reset the system when this happens. Here is how to reset the TPMS on 2017 2018 2019 2020 Fiat 124 Spider:
Make sure to adjust the tire pressure recommended on the tire placard
The tire placard located on the door panel
Turn on the ignition without starting the engine
If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
Look for the TIRE SET button and then press it until you hear a chimes
The button is located in the instrument panel
Turn the ignition off and start the engine to verify the indicator has been reset
These instructions are based on the Fiat 124 Spider owner’s manual. This procedure should apply to the second generation of Fiat 124 Spider (2017 2018 2019 2020 model years). Hopefully, the article 2017-2020 Fiat 124 Spider TPMS Tire Pressure Warning Light Reset Guide can solve your problem. Good Luck!