2016-2021 Audi R8 TPMS Tire Pressure Monitor System Light Reset Guide

2016-2021 Audi R8 TPMS Tire Pressure Monitor System Light Reset Guide – The Audi R8 was presented in 2007 as a 4.2 FSI Quattro with a V8 engine. It is a production version of the Audi Le Mans Quattro concept car presented in 2003.

The name R8 refers to the R8 race car from Audi, which won the 24 Hours of Le Mans, among other things, five times. In February 2015, the second generation of the R8 was presented at the Geneva Motor Show.

2016-2021 Audi R8 TPMS Tire Pressure Monitor System Light Reset Guide

2016-2021 Audi R8 TPMS Tire Pressure Monitor System Light Reset Guide

Time needed: 7 minutes.

You have to reset the specified pressures whenever you adjust tire pressures, change a tire, or get it rotated in order for the TPMS to operate appropriately. Proceed as follows :

  1. Turn ignition switch to ON position but do not start the engine

    If your vehicle has an ignition button, press the START-STOP ENGINE button once without touching the brake pedal.

  2. Press the MENU button on the MMI controls to access the main menu

    The button is located on the center console
    oil tpms tire pressure light reset

  3. Select “SERVICE & CHECKS”

    Use the MMI control button to enter the menu

  4. Scroll down and select “TIRE PRESSURE MONITORING”

    A message will appears on the display

  5. Select STORE TIRE PRESSURE

    A confirmation message will appears on the screen

  6. Select YES to execute the TPMS reset

    Done!

These instructions are based on the Audi R8 owner’s manual. This procedure should apply to the second generations of Audi R8 (2016 2017 2018 2019 2020 2021 model years). Hopefully, the article 2016-2021 Audi R8 TPMS Tire Pressure Monitor System Light Reset Guide can solve your problem. Good Luck!