2007-2009 Bentley Azure Service Minder Light Reset

Last Updated on April 22, 2020 by Nick

2007-2009 Bentley Azure Service Minder Light Reset – The Bentley Azure is a large car convertible manufactured by the British brand Bentley. It is a convertible two-door and four-seater, with a longitudinal front-engine, rear-wheel drive, and four-speed gearbox. The first generation Azure is basically the convertible version of the Bentley Continental R.

The second generation of the Azure is related to the Bentley Arnage, which is a four-door sedan. It has a gasoline engine V8 turbocharged of 6.8 liters of displacement and 455 CV of maximum power. Its acceleration from 0 to 60 mph is 5.6 seconds; according to the US Department of Energy, the Azure is the car in its category with the lowest fuel consumption.

2007-2009 Bentley Azure Service Minder Light Reset

2007-2009 Bentley Azure Service Minder Light Reset

Time needed: 3 minutes

When engine oil service is due, Service Minder Light will appear on the display. The oil service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder Light on your Bentley Azure:

  1. Make sure the vehicle is completely stopped

    Turn OFF the ignition

  2. Press and hold the TRIP and CANCEL buttons simultaneously

    The button is located on the instrument panel
    service minder light reset

  3. Turn the ignition key to the “ON” position

    Don’t start the engine!

  4. Keep hold the buttons until you see a blank screen

    Release the button when blank screen appears on the display.

  5. Press and hold both buttons again until you see SERIAL NUMBER

    Release the buttons when SERIAL NUMBER appears on the display.

  6. Go to SERVICE INTERVAL menu by pressing the TRIP button repeatedly

    Press the TRIP button briefly to cycle the menu

  7. Scroll down to RESET NOW

    Press the CANCEL button to scroll

  8. Press and hold the CANCEL button to confirm the reset

    Press the CANCEL button until beep sounds

  9. Turn the ignition off and then start the engine to verify the indicator has been reset.

    Done!

For more details, please watch the following video:

These instructions are based on Bentley owner’s manual. This procedure should apply to the second generation of the Bentley Azure (2007 2008 2009 models). Hopefully, the article of 2007-2009 Bentley Azure Service Minder Light Reset useful for you. Good Luck!