2009-2015 Toyota Land Cruiser Maintenance Service Light Reset Guide

Time needed: 3 minutes

Now we’re inside the Land Cruiser, and we’re going to reset the maintenance light. We’ll use the Trip button on the dash to do it. So the first thing you’re going to have to do is:

1. Turn on the ignition without starting the engine

   First, you’re going to push the START button twice until all the lights light up on the dash and make sure your foot is off the brake pedal 

2. Go to the TRIP A

   Then you’re going to put the trip odometer here so you’ll switch it to it’s on the TRIP A
   

3. Next, turn off the ignition

   Next, what you’re going to do is you’re going to cycle the key off

4. Press and hold the ODO/TRIP button as you turn on the ignition again

   After that, you’re going to hold the ODO/TRIP button down and then at the same time push the START button twice to turn it on again 

5. Continue to hold down the ODO/TRIP button

   Keep hold that button and then on the dash screen on you’ll see it count down backwards and once it gets to zero the maintenance light reset is complete