The Easy Way To Reset Nikon D7200 DSLR Camera To Factory Settings

The Easy Way To Reset Nikon D7200 DSLR Camera To Factory Settings – The Nikon D7200 is a digital SLR camera from the Japanese manufacturer Nikon, which was launched in March 2015. The 24.2-megapixel image sensor allows pictures with a maximum of 6000 × 4000 pixels. It has a size of 23.5 mm × 15.6 mm (manufacturer name DX-format).

The autofocus system (manufacturer’s name Multi-CAM 3500 II) has 51 focus points, 15 of which are cross sensors. The images are saved in the manufacturer’s raw data format NEF with 12 or 14-bit colour depth or in JPEG format. Two SDXC card slots are available for this.

The Easy Way To Reset Nikon D7200 DSLR Camera To Factory Settings

The Easy Way To Reset Nikon D7200 DSLR Camera To Factory Settings

Time needed: 7 minutes.

There are several reasons you need to reset your Nikon D7200 camera to factory settings, such as when you want to sell it or when a system error. In this article, we will provide information about resetting the shooting settings to their default values by simply holding two buttons.

  1. Turn on your camera

    Make sure your camera has enough power

  2. Press and hold the ISO and +/- EXPOSURE COMPENSATION buttons simultaneously for three seconds

    Both buttons denoted by the green dots
    nikon factory settings reset

  3. If the LCD control panel blinks, the system is resetting

    Done!

These instructions are based on the Nikon owner’s manual. Hopefully, the article The Easy Way To Reset Nikon D7200 DSLR Camera To Factory Settings can solve your problem. Good Luck!