How Do I Reset Tire Pressure System TPMS Light on Lexus LFA (2012)

Time needed: 7 minutes

Tire pressure monitoring system (TPMS) or also known as TPWS on Lexus cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2011 2012 Lexus LFA, it is necessary to reset the TPMS. In this generation, your vehicle will be equipped with a TPMS reset button. Follow these steps to do it:

1. Stop the vehicle and turn off the engine

   Tire pressure reset process cannot be done while the vehicle is moving.

2. Adjust the cold tire pressure in all four tires recommended on the tire placard

   The tire placard located on the door panel

3. Turn the ignition key to the “ON” position without starting the engine

   If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal

4. Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.

   Each model year has a different button location
   

5. Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.

   Done!