How Do I Reset Tire Pressure System TPMS Light on Lexus LFA (2012) – The Lexus LFA is a sports car that was produced from 2010 to the end of 2012. The development of the LFA started in the year 2000 not as an official trajectory for a new Lexus model, but as a project to collect knowledge.
The first version of the LF-A concept car debuted in 2005, followed by a second version of LF-A in 2007. The third version of the LF-A – a roadster model – debuted in 2008. The final production model, official name “LFA,” was displayed at the Tokyo Motor Show in October 2009.
How Do I Reset Tire Pressure System TPMS Light on Lexus LFA (2012)
Time needed: 7 minutes.
Tire pressure monitoring system (TPMS) or also known as TPWS on Lexus cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2011 2012 Lexus LFA, it is necessary to reset the TPMS. In this generation, your vehicle will be equipped with a TPMS reset button. Follow these steps to do it:
- Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal
- Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.
Each model year has a different button location
- Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.
These instructions are based on the Lexus LFA owner’s manual. This procedure should apply to the first generation of the Lexus LFA (2011 2012 model years). Hopefully, the article How Do I Reset Tire Pressure System TPMS Light on Lexus LFA (2012) can solve your problem. Good Luck!