How To Reset Oil Maintenance Light On Lexus CT200h (2011-2017)

Time needed: 3 minutes

This section will show my process to reset the oil maintenance light for a Lexus CT200h. You can apply this steps guide to the 2011, 2012, 2013, 2014, 2015, 2016, 2017 model years. This sequence works every time if I do it exactly this way. So here we go.

1. Stop the vehicle and turn on the ignition

   First, click on the POWER button twice to turn on your ignition without starting the engine

2. Make sure you’re on the TRIP A screen

   There is an ODO/TRIP button on the dash. So you need to press it to set it to the TRIP A
   

3. Turn off the ignition

   Next, push the POWER button once to turn it off

4. Hold down the ODO/TRIP button

   Now you need to push and hold the ODO/TRIP button down

5. Turn on the ignition again

   Then as you’re still holding it turn the ignition on again

6. Continue to hold down the ODO/TRIP button

   Keep holding it and wait until you see it’s flashing then when it’s all zeros it’s done