2010-2022 Land Rover Discovery LR4 Service Required Light Reset Guide

Hey, mister! What is going on? Today I’m working on a Land Rover Discovery or LR4 service required light reset. The oil change is done, but the service required light is still on, so I have to reset that.

I’ve actually done this quite a few times, and for some reason, every time I do it, it never seems to take, or it takes quite a few times to get it to stop telling you that service is required. So now I’ll take you along and show you how it’s done.

Table of Contents

2010-2022 Land Rover Discovery LR4 Service Required Light Reset Guide
2010-2016 Land Rover LR4 (L319)
2017-2022 Land Rover Discovery (L462)

2010-2022 Land Rover Discovery LR4 Service Required Light Reset Guide

For your info, this guide will be valid for the Land Rover Discovery L319/L462 (2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 model years).

2010-2016 Land Rover LR4 (L319)

With the car is off open the driver’s side door and pop the hood
Then pushing the START button once, but not actually running it
Now I’m going to push the BRAKE pedal and the GAS pedal at the same time for about 60 seconds
If you don’t want to count time just wait till it stopped beeping then you know it’s been a little over 60 seconds
There is no indication that it’s doing anything. So once you are done with that, you need to check to verify that the service required reminder is gone. So I’m gonna start the car and verify that the service required reminder is no longer there

2017-2022 Land Rover Discovery (L462)

Time needed: 3 minutes

This section will show you how to reset the service light on the new Land Rover Discovery L462. You must do all this with the driver’s side door and the hood being open. So let’s go for it.

Turn on the ignition without starting the engine
First off you want to turn the ignition on but you don’t want to start the car
Open the bonnet and the driver’s side door
When the ignition is on you need to open the bonnet or the hood then you’ll want to open the driver’s side door
Step on the ACCELERATOR and the BRAKE pedals
After that, you press the Brake and the Accelerator pedal completely and hold it
Keep holding the pedals
The service resetting should appear in the display after a couple of seconds and once it disappears you can release both pedals and you’re done

Alright, guys, thanks so much for your time. I hope you learned a little bit about Discovery 4 today. Stay tuned for a lot more content, and we’ll see you on the next one.

Nick

Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.

Next How To Reset Oil Change Light On Dodge Nitro (2007-2011) »

Previous « Reset Fujifilm FinePix HS50 EXR to Factory Setting