The GMC Yukon is an SUV of the American car manufacturer GMC. It is currently offered in the fifth generation and is based on the GMT chassis of General Motors like the Chevrolet Tahoe and Suburban. Today I want to talk about resetting the oil life light on the GMC Yukon after an oil change.
So when the remaining oil life is low, you will get the Change Engine Oil Soon warning light. So do an oil change on your car after you see this warning. Then you must reset the oil life interval after each oil change. So let’s get into it now.
Table of Contents
This section will show you the fastest way to reset the change engine oil light on the GMC Yukon. It’s pretty simple; once you’ve changed the oil, just turn the car to the run position and then pump the gas pedal three times within five seconds, which will reset the system.
Time needed: 3 minutes
All right, friends, to reset your maintenance light on this car, ensure your GMC Yukon is not running. Once you’ve done the oil change, you will use the steering wheel buttons, and we’ll pay attention to the gauge cluster. So let’s check this out!
If you have the push start button, you should make sure your foot is not on the brake and then hold down the START button for about five to ten seconds to make the car to the accessory mode
The button is located on the steering wheel
Press the ✓ button to enter the menu
Now we’re going to go ahead and scroll down until we find the remaining oil life
Once you’re on that screen, you’re going to use the ► right arrow, and it’s gonna give you a simple option to reset
Finally, hit the ✓ checkmark button to perform the oil life reset
Now you can just go ahead to turn off the car, then restart it and just double check to make sure it did reset
In this section, I will show you how to reset oil life on the latest generation of GMC Yukon. This method is also very easy because, like the previous generation, we will use the navigation buttons on the right side of the steering wheel. So let’s do it.
For your info, this operation work for the fourth and fifth generations of the GMC Yukon (2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 model years). For the older model, you can reach it here.
It is essential to follow a maintenance schedule to keep your GMC Yukon running smoothly. Your car should have routine maintenance performed every 7,500 miles or every six months, depending on mileage. This includes checking the engine oil, filter, and hoses, replacing the air filter in the passenger compartment, and replacing brake fluid. A GMC Yukon maintenance schedule also includes inspecting the engine cooling system and replacing the air filter.
Regular oil change costs around $96 to $114 and includes parts and labor. You can do the task yourself by following simple steps. First, open the hood, remove the old air filter, and replace it with the new one. You can also check YouTube for tutorials on changing the oil in your GMC Yukon. Depending on the model, you should replace a new battery every five to seven thousand miles.
Changing the GMC Yukon’s brake pads is another easy, inexpensive, and essential maintenance task. You can purchase the necessary brake pad replacement at any gas station, which will only cost a few dollars. Check your manual for recommended maintenance intervals, and ensure you perform the work on time. You can also replace the steering column or the brakes if needed. These two tasks are essential for keeping your GMC Yukon running smoothly.
The GMC Yukon maintenance schedule recommends regular oil changes, tire rotations, and brake pad replacements. Regular service will also include the passenger compartment air filter replacement and evaporative control system inspection. A GMC Yukon maintenance schedule is also available online, and you can even find coupons and schedule an appointment to have it serviced. It is easy to schedule service online at your convenience! If you have a new car, follow these steps to keep it running as smoothly as possible.
SAE 0W-20 full synthetic oil is required for the 2019 GMC Yukon. The 5.3L V8 and the 6.2L V8 engines have 8 quarts of oil capacity.
Towing or driving in dusty circumstances may need more frequent oil changes than the 7,500 miles recommended by GMC.
Consider Castrol Edge, Kendall, Mobil 1, Valvoline SynPower, or Shell Rotella synthetic oil if you intend on handling your oil change.
An oil change for your Yukon at a dealership or auto shop will cost you between $120 to $150.
Okay, friends, that’s what I’ve got for you for basic oil life reset after an oil change on the GMC Yukon. I hope you learned a little something along the way if you did. If you want to talk about it, leave it in the comment section below because I always love to hear from you. So thanks for reading!
Hey what's up Bimmers! Owning a BMW M8 comes with the responsibility of proper maintenance,…
Greetings, fellow Bimmer lovers! Today, we have an exciting topic to delve into: how to…
What's up Bimmer! Welcome to our guide on resetting the oil service light on your…
Wassup Bimmers? When it comes to maintaining your BMW M4 F82/F83/G82/G83, resetting the oil service…
Hey, what's up Bimmers! Welcome to the comprehensive guide on performing an easy oil service…
Hi, Bimmers! In the fast-paced world of automotive technology, staying on top of routine maintenance…
This website uses cookies.