Volkswagen UP: How To Reset TPMS Tyre Pressure Light (2014-2021)
|Last Updated on March 3, 2021 by Nick
Volkswagen UP: How To Reset TPMS Tyre Pressure Light (2014-2021) – The Volkswagen UP! is a car produced by the German car brand Volkswagen. The UP! is part of the Volkswagen New Small Family platform and debuted in 2007 as a concept car at the IAA in Frankfurt.
Although the engine was placed in the rear in the concept model, it turned out to be in the front in the production variant unveiled in 2011. This originally only concerned a 1.0-litre three-cylinder petrol variant, but at the end of 2013, the range was expanded with an electric variant.
VW Volkswagen UP: How To Reset TPMS Tyre Pressure Light (2014-2021)
Time needed: 7 minutes
Each time a tire pressure has been adjusted or change the tire, you need to reset the Tire Pressure Monitoring System (TPMS). In this 2013 2014 2015 2016 2017 2018 2019 VW Volkswagen UP, you can reset TPMS using the SET button. Here’s how to do it:
- Stop the vehicle and turn off the engine
Make sure your vehicle is in a safe place
- Adjust the cold tire pressure in all four tires recommended on the tire placard on the door panel
The cold tire is a tire that is not driven more than 3 hours
- Switch on the ignition without starting the engine
If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal
- Look for the TPMS SET button and then press it until you hear a chimes
The button is located on the centre console
These instructions are based on the Volkswagen UP owner’s manual. This procedure should apply to the first generation of VW Volkswagen UP (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Volkswagen UP: How To Reset TPMS Tyre Pressure Light (2014-2021) can solve your problem. Good Luck!