Škoda Enyaq: How To Reset Loss Tyre Pressure Light (2021)

Time needed: 7 minutes

Each time a tyre pressure has been adjusted or change the tyre, you need to reset the Tyre Pressure Monitor System (TPMS). In this 2020 2021 Škoda Enyaq, you can reset Tyre Pressure Monitor using the infotainment display. Here’s how to do it:

1. Stop the vehicle and turn off the engine

   Make sure your vehicle is in a safe place

2. Adjust the cold tire pressure in all four tires recommended on the tire placard on the fuel filler flap

   The cold tire is a tire that is not driven more than 3 hours

3. Switch on the ignition without starting the engine

   If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal

4. Press SET button

   The button located below the front air vents
   

5. Select VEHICLE SETTINGS menu

   Tap the touchscreen to select the menu

6. Select TYRES

   The Tyre Pressure Monitoring System menu will appear on the display
   

7. Select SET

   A confirmation message will appears

8. Select CONFIRM to execute the TPMS reset

   Done!