2015-2020 Škoda Citigo Tyre Pressure Warning Light Reset Guide

Last Updated on March 18, 2021 by Nick

2015-2020 Škoda Citigo Tyre Pressure Warning Light Reset Guide – The Škoda Citigo is a mini-class car produced by the Czech car brand Škoda Auto, part of the Volkswagen AG group. The car was officially presented to the public in October 2011.

The Citigo was developed together with the Volkswagen up! and the Seat Mii. Just like the Peugeot 107, Citroën C1 and Toyota Aygo, the Citigo is part of triplets. The VAG group triplets are being built in Bratislava, Slovakia.

2015-2020 Škoda Citigo Tyre Pressure Warning Light Reset Guide

2015-2020 Škoda Citigo Tyre Pressure Warning Light Reset Guide

Time needed: 7 minutes

Each time a tire pressure has been adjusted or change the tire, you need to reset the Tyre Pressure Monitoring System. In this 2015 2016 2017 2018 2019 2020 Škoda Citigo, you can reset the tyre pressure using the SET button. Here’s how to do it:

  1. Stop the vehicle and turn off the engine

    Make sure your vehicle is in a safe place

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard on the fuel filler flap

    The cold tire is a tire that is not driven more than 3 hours

  3. Switch on the ignition without starting the engine

    If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal

  4. Look for the TYRE SET button and then press it until you hear a chimes

    The button is located in the centre console (for older model) and in the glove box (for the latest model)
    toyota tire pressure tpms light reset

These instructions are based on the Škoda Citigo owner’s manual. This procedure should apply to the first generation of Škoda Citigo (2015 2016 2017 2018 2019 2020 model years). Hopefully, the article 2015-2020 Škoda Citigo Tyre Pressure Warning Light Reset Guide can solve your problem. Good Luck!