How To Reset Hummer H3 Change Oil Minder Oil Life Light (2005-2010)
Last Updated on April 13, 2020 by Nick
How To Reset Hummer H3 Change Oil Minder Oil Life Light (2005-2010) – The Hummer H3 is a US manufacturer Hummer off-road car, which was introduced in 2006. Its GMT345 platform is based on the GMT355 which serves as a basis for pickups Chevrolet Colorado and GMC Canyon. The H3 was built in Louisiana, the United States and Struandale, Port Elizabeth, South Africa. At present, there are 10 Hummer H3 versions.
The Hummer H3 measured 4.74 meters long, 1.90 meters wide and 1.89 meters high. The engine is General Motors Vortec 3.7-liter inline five-cylinder, dual overhead cams and variable valve head that provides 128 hp at 5,600 rpm and a torque of 328 Nm at 6,600 laps par. Five-speed manual transmission in addition to the existing four-speed automatic electronically controlled Hydra-Matic 4L60. System four-wheel drive with electronic control, which includes traction control, optional rear differential lock system and StabiliTrak electronic stability control, which is standard.
How To Reset Hummer H3 Change Oil Minder Oil Life Light (2005-2010)
Time needed: 7 minutes
When the remaining oil life is low, the Oil Change message will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your Hummer H3:
- Turn the ignition key to the “ON” position
Don’t start the engine!
- Press the TRIP button briefly until you see Oil Life on the display
The button is located on the instrument cluster
- Press and hold the TRIP button for several seconds
Once the alternating “Oil Life” and “Reset” messages appear, press and hold the button until several beeps sound.
- Turn the ignition off and start the engine to verify the indicator has been reset
Done!
Method 2:
You can also reset the Engine Oil Life System through the following ways:
- Turn the ignition to ON position without starting the engine.
- Fully press and release the accelerator pedal 3 times within five seconds.
- Turn the ignition off and start the engine to verify the indicator has been reset.
For more details, please watch the following video:
These instructions are based on the Hummer owner’s manual. This procedure should be work on the third generation of Hummer H3 (2005 2006 2007 2008 2009 2010 model years). Hopefully, the article How To Reset Hummer H3 Change Oil Minder Oil Life Light (2005-2010) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.