How To Reset TPMS Tyre Pressure Light on Audi Q2 (2017-2021)

Time needed: 7 minutes

You have to reset the specified pressures whenever you adjust tire pressures, change a tire, or get it rotated in order for the TPMS to operate appropriately. Here is how to reset the TPMS on 2017 2018 2019 2020 2021 Audi Q2:

1. Stop the vehicle and turn off the engine

   Make sure your vehicle is in a safe place

2. Adjust the cold tire pressure in all four tires recommended on the tire placard on the door panel

   The cold tire is a tire that is not driven more than 3 hours

3. Turn ignition switch to ON position but do not start the engine

   If your vehicle has an ignition button, press the START-STOP ENGINE button once without touching the brake pedal.

4. Press the MENU button on the MMI controls to access the main menu

   The button is located on the center console

5. Go to CAR or VEHICLE menu

   Use the MMI control button to scroll and select the menu

6. Find and select SERVICE & CHECKS

   Use the left control button to cycle the menu screen
   

7. Scroll down and select TIRE PRESSURE MONITORING

   A message will appears on the display

8. Select STORE TIRE PRESSURE

   A confirmation message will appears on the screen

9. Select YES to execute the TPMS reset

   Done!