How To Reset Chevrolet Uplander TPMS Tire Pressure Sensor Light (2008) – The Chevrolet Uplander is a van of the Chevrolet division of the US manufacturer General Motors with front or all-wheel drive. It was only offered in North America.
It was built in the Doraville Assembly in Doraville near Atlanta, the capital of the US state of Georgia. It replaced the Venture and Astro models. On November 21, 2005, GM announced that the plant would be closing in late 2008.
Time needed: 7 minutes
If you have a 2008 2009 Chevrolet Uplander, you can reset the TPMS by increasing or decreasing the tire pressure without using tools. Follow these instructions to get started:
If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
The horn will sound twice and the TIRE LEARNING ACTIVE message will appear indicating the TPMS matching process has started
Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds
A horn chirp will confirm that the sensor has been reset
The TIRE LEARNING ACTIVE message will disappear
Done!
These instructions are based on the Chevy Uplander owner’s manual. This procedure should apply to the first generation of the Chevy Uplander (2008 2009 model years). Hopefully, the article How To Reset Chevrolet Uplander TPMS Tire Pressure Sensor Light (2008) can solve your problem. Good Luck!
Hey what's up Bimmers! Owning a BMW M8 comes with the responsibility of proper maintenance,…
Greetings, fellow Bimmer lovers! Today, we have an exciting topic to delve into: how to…
What's up Bimmer! Welcome to our guide on resetting the oil service light on your…
Wassup Bimmers? When it comes to maintaining your BMW M4 F82/F83/G82/G83, resetting the oil service…
Hey, what's up Bimmers! Welcome to the comprehensive guide on performing an easy oil service…
Hi, Bimmers! In the fast-paced world of automotive technology, staying on top of routine maintenance…
This website uses cookies.