Ford Flex: How To Reset Oil Life/Oil Change Light (2013-2019)

Hello, sunshine! Wishing you got a day full of sunny smiles. On today’s short service light reset walkthrough demonstration, we will do the oil life, or oil change light reset on a Ford Flex. So this model here we have the two model small LCD on the dash.

When the engine oil life is less than 10%, you’ll see the Change Engine Oil Soon Light on the screen. So after you get an oil change or change the oil yourself, you’re going to have to reset the oil life back, so it’s not popping up when you start the car. So let’s get right up in this.

Table of Contents

Ford Flex: How To Reset Oil Life/Oil Change Light (2013-2019)
With Dual Dash Screen
With Middle Dash Screen

Ford Flex: How To Reset Oil Life/Oil Change Light (2013-2019)

For your info, this guide will be valid for the second generation of the Ford Flex (2013, 2014, 2015, 2016, 2017, 2018, 2019 model years).

With Dual Dash Screen

Time needed: 3 minutes

In this section, we will be looking at how to reset the oil life on a Ford Flex with a dual dash screen. So the first step you need to do is:

Turn on the ignition without starting the engine
We’re located inside the vehicle now. If your vehicle has a physical key fob blade you’re going to insert the key into the ignition and turn it to the second position to power on the accessories mode
Get the main menu
Then using the thumb pad on the left side of the steering wheel, you’re going to scroll to the left until you get to the main menu
Go to the SETTINGS
If you’re in one of the side menus you just have to go down to SETTINGS and hit OK
Scroll to the VEHICLE
After that, go up to VEHICLE and hit OK
Scroll down to OIL LIFE RESET
Next, go find the OIL LIFE RESET and hit OK
Highlight the percentage you want
At this point is where you can actually set it to different intervals. So if you’re running like a full synthetic you’d set it to 90 to 100, but if you’re running the synthetic blend you might want to set it to like 50 to 60 so you’re not going too long on the intervals
Hold down OK
Once you are done with that, we’re going to go ahead and hit hold OK to reset

With Middle Dash Screen

First, turn it to the on position so all the lights are gonna come on
Then all you do is hit the left button until you get to the main menu
Right here you scroll down to SETTINGS and hit OK
Go into CONVENIENCE
Scroll down to OIL LIFE RESET and then you hit OK
To reset it you just hold the OK button down and you’ll see it’s loading up and it said oil life reset to a hundred percent

So that’s how you do it, guys. When you turn it on, you’ll see that your Ford Flex is going to start with no saved codes, no oil change light, and your car is ready to go. Hopefully, this helps somebody, and good luck with your DIY oil change. Thank you for your time. Farewell.

Nick

Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.

Next How To Reset Oil Life/Oil Change Light On Ford Flex (2009-2012) »

Previous « How To Reset Oil Life On Ford C-MAX After Oil Change (2013-2019)