How To Reset Audi Q5 Service Due Minder Oil Change Light (2018-2020)
|Last Updated on April 11, 2020 by Nick
How To Reset Audi Q5 Service Due Minder Oil Change Light (2018-2020) – The second generation was presented in September 2016 and launched in January 2017. The new generation has a less round, but tighter appearance. Following the Q7, it also has the Q-grill that is connected to the headlights.
The car grew slightly, but at the same time became lighter, up to 90 kg. The interior is the same as in the new Audi A4, on which the Q5 is still technically based. The Audi Virtual Cockpit is now also available in the Q5.
How To Reset Audi Q5 Service Due Minder Oil Change Light (2018-2020)
Time needed: 7 minutes
When engine oil service is due, the Oil Change warning light will appear on the display. The service interval must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Change Light on your Audi Q5:
- Turn ignition switch to ON position but do not start the engine
If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal.
- Press the MENU button on the MMI controls to access the main menu
The button is located on the center console
- Go to CAR or VEHICLE menu
Use the MMI control button to enter the menu
- Select “SERVICE & CHECKS”
Use the MMI control button to enter the menu
- Scroll down and select “SERVICE INTERVAL”
Use the MMI control button to enter the menu
- Scroll down and select RESET OIL CHANGE INTERVAL
Use the MMI control button to enter the menu
- When a message appears on the display, select YES to confirm
Done!
These instructions are based on the Audi owner’s manual. This procedure should be work on the second generation of Audi Q5 (2018 2019 2020 2021 model years). Hopefully, the article How To Reset Audi Q5 Service Due Minder Oil Change Light (2018-2020) useful for you. Good Luck!