Ford S-Max: How To Reset TPMS Tyre Pressure Sensor Light (2015-2021)

Last Updated on December 1, 2020 by Nick

Ford S-Max: How To Reset TPMS Tyre Pressure Sensor Light (2015-2021) – The Ford S-MAX is a large MPV produced by Ford. The car was presented at the 2006 Geneva Motor Show. The Ford S-MAX was made in Genk, Belgium.

The S-MAX is based on the Ford EUCD platform, which is also used for the Ford Galaxy, Ford Mondeo, and Mazda 6. It is intended as a sporty variant of the MPVs and fits between the large MPV Galaxy and the small MPV (Grand) C-MAX.

Ford S-Max How To Reset TPMS Tyre Pressure Sensor Light (2015-2021)

Ford S-Max: How To Reset TPMS Tyre Pressure Sensor Light (2015-2021)

Time needed: 7 minutes

Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. Here is how to reset the TPMS on 2015 2016 2017 201 2019 2020 2021 Ford S-Max:

  1. Park your vehicle

    Stop the vehicle and turn off the engine

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the START/STOP button once without touching the brake pedal

  4. Press ◄ navigation button to enter the cluster menu

    The button is located on the steering wheel
    change engine oil life light reset

  5. Go to DRIVER ASSIST

    Use the navigation button to scroll and press OK to select

  6. Scroll down and select TYRE MONITOR

    Use the navigation button to scroll

  7. Press and hold the OK button until a confirmation message appear on the screen

    Done!

These instructions are based on the Ford S-Max owner’s manual. This procedure should apply to the second generation of Ford S-Max (2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Ford S-Max: How To Reset TPMS Tyre Pressure Sensor Light (2015-2021) can solve your problem. Good Luck!