2012-2017 Ford B-Max TPMS Tyre Pressure Sensor Light Reset Guide

Last Updated on November 30, 2020 by Nick

2012-2017 Ford B-Max TPMS Tyre Pressure Sensor Light Reset Guide – The Ford B-MAX is a car model of the European branch of the US Ford car manufacturer. The car belongs to the MPV class. The model is being built in 2012 in Craiova, Romania.

Production was discontinued in 2017 due to disappointing sales figures. Unusual for a production car is the fact that the B-Max has no center pillars.

2012-2017 Ford B-Max TPMS Tyre Pressure Sensor Light Reset Guide

2012-2017 Ford B-Max TPMS Tyre Pressure Sensor Light Reset Guide

Time needed: 7 minutes

Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. You can reset the TPMS via the infotainment display by using the display controls on your 2012 2013 2014 2015 2016 2017 Ford B-Max. Follow these steps to do it:

  1. Park your vehicle

    Stop the vehicle and turn off the engine

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the START/STOP button once without touching the brake pedal

  4. Press MENU button to enter the main menu

    Th button is located on the audio unit
    ford tpms tire pressure light reset

  5. Go to VEHICLE SETTINGS

    Use the navigation button to scroll and press OK to select

  6. Select TYRE MONITOR or Deflation Detection

    Use the navigation button to scroll

  7. Press and hold the OK button until a confirmation message appear on the screen

    Done!

These instructions are based on the Ford B-Max owner’s manual. This procedure should apply to the first generation of Ford B-Max (2012 2013 2014 2015 2016 2017 model years). Hopefully, the article 2012-2017 Ford B-Max TPMS Tyre Pressure Sensor Light Reset Guide can solve your problem. Good Luck!