2020 Jeep Gladiator Oil Change Required Warning Light Reset

2020 Jeep Gladiator Oil Change Required Warning Light Reset – Tens of years were absent from producing pickup, bringing new euphoria to the Jeep brand. Jeep Gladiator is divided into five variants, with different features. Namely Sport, Sport S, Overland, Rubicon and finally the most luxurious Launch Edition.

Sports Series to Overland, not intended to bulldoze the offroad terrain that is too heavy. Launch Edition Series, is a limited variant. The base is the same as Rubicon, but with a myriad of additional features. For machines, there is no differentiation between trim levels. All rely on the 3.6-liter Pentastar V6 engine which is embedded behind its 7-line grille.

2020 Jeep Gladiator Oil Change Required Warning Light Reset

Method 2:

The oil life system can also be reset as follows:

• Turn the ignition key to position “RUN” without starting the engine, If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal.
• fully depress the GAS PEDAL slowly three times within 10 seconds
• Turn the ignition off and start the engine to verify the indicator has been reset.

For more details, please watch the following video:

These instructions are based on the Jeep owner’s manual. This procedure should be work on the first generation of Jeep Gladiator (2019 2020 2021 model years). Hopefully, the article of 2020 Jeep Gladiator Oil Change Required Warning Light Reset can solve your problem. Good Luck!