2018-2021 Volvo XC40 TPMS Tire Pressure Sensor Light Reset Guide
|Last Updated on December 30, 2020 by Nick
2018-2021 Volvo XC40 TPMS Tire Pressure Sensor Light Reset Guide – The Volvo XC40 is a compact SUV from the Volvo brand. The XC40 was introduced at the end of 2017 and is built on the CMA (Compact Modular Architecture) platform.
The richly equipped Launch Edition consisted of an automatic gearbox, and for the engine, there was a choice between a D4 AWD (190 hp) and a T5 AWD (247 hp). At the end of December, the choice was expanded to a D3 (150 hp) and a T3 (157 hp). This version has been voted Car of the Year 2018.
2018-2021 Volvo XC40 TPMS Tire Pressure Sensor Light Reset Guide
Time needed: 7 minutes
Whenever tire pressure is adjusted or change the tire you need to reset or calibrate the Tire Pressure Monitoring System (TPMS). Depending on your vehicle model, here are a few ways to reset the TPMS on 2018 2019 2020 2021 Volvo XC40:
- Stop the vehicle
Turn off the engine
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Start the engine
With depressing the brake pedal and put the key into the ignition slot, press the START/STOP ENGINE button
- Select the CAR STATUS app
The button is located on the center display
- Select TPMS
Tap the touchscreen to select the menu
- Select STORE PRESSURE or CALIBRATE
A confirmation message will appears in the display
- Select OK to execute the TPMS reset
Tap the touchscreen to select
- Start the engine and drive the vehicle at a speed above 20 mph until the new inflation pressure has been saved
Done!
These instructions are based on the Volvo XC40 owner’s manual. This procedure should apply to the first generation of Volvo XC40 (2018 2019 2020 2021 model years). Hopefully, the article 2018-2021 Volvo XC40 TPMS Tire Pressure Sensor Light Reset Guide can solve your problem. Good Luck!