2020-2021 Toyota Venza Hybrid Tire Pressure TPMS Light Reset Guide

Time needed: 7 minutes

Tire pressure monitoring system (TPMS) or also known as TPWS on Toyota cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2020 2021 Toyota Venza Hybrid, it is necessary to reset the TPMS. Follow these steps to do it:

1. Stop the vehicle and turn off the engine

   Tire pressure reset process cannot be done while the vehicle is moving.

2. Adjust the cold tire pressure in all four tires recommended on the tire placard

   The tire placard located on the door panel

3. Start the engine

   If your vehicle has an ignition button, Depress the brake pedal and then press the ENGINE START/STOP button shortly

4. Go to [wp-svg-icons icon=”cog-2″ wrap=”i”] menu by using the ◄ ► navigation button

   The button is located on the steering wheel
   

5. Scroll and select the VEHICLE SETTINGS menu

   Press and hold the OK button to enter the menu

6. Select TPWS SETTING

   Press the OK button to select

7. Select SETTING PRESSURE

   Press the OK button to select

8. Press and hold the OK button until the TPMS indicator blinks 3 times

   “—” will appears on the screen for the inflation pressure of each tire while the reset process is being performed.

9. Run and drive your car

   TPMS calibration process will complete after 30 minutes driving between 25 mph (40 km/h).