2007-2021 Toyota Sequoia Tire Pressure System TPMS Light Reset Guide
|Last Updated on September 22, 2020 by Nick
2007-2021 Toyota Sequoia Tire Pressure System TPMS Light Reset Guide – The Toyota Sequoia is an SUV manufactured by Toyota at their Princeton, Indiana plant. In 2009, the Sequoia was sold exclusively in the US, Canada, Mexico, and the Middle East.
Toyota introduced the Sequoia, 2008 model, at the 2007 Los Angeles Auto Show; sales began the following December. The new model is based on Tundra.
2007-2021 Toyota Sequoia Tire Pressure System TPMS Light Reset Guide
Time needed: 7 minutes
Tire pressure monitoring system (TPMS) or also known as TPWS on Toyota cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Sequoia, it is necessary to reset the TPMS. Follow these steps to do it:
- Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal
- Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.
Each model year has a different button location
- Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.
Done!
These instructions are based on the Toyota Sequoia owner’s manual. This procedure should apply to the second generation of the Toyota Avalon (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article 2007-2021 Toyota Sequoia Tire Pressure System TPMS Light Reset Guide can solve your problem. Good Luck!