2012-2015 Scion iQ Tire Pressure Sensor TPMS Light Reset Guide

Last Updated on September 29, 2020 by Nick

2012-2015 Scion iQ Tire Pressure Sensor TPMS Light Reset Guide – The Toyota iQ is a car model from the Japanese carmaker Toyota. IQ is an A-segment car.

The concept car was presented as iQ Concept at the IAA in Frankfurt in September 2007. The production version was shown to the public at the Geneva Motor Show in February 2008. In Japan, sales started in October 2008. In Europe, sales began in 2009.

2012-2015 Scion iQ Tire Pressure Sensor TPMS Light Reset Guide

2012-2015 Scion iQ Tire Pressure Sensor TPMS Light Reset Guide

Time needed: 7 minutes

If the TPMS warning light appears on your 2012 2013 2014 2015 Scion iQ, it is necessary to reset the TPMS. In this generation, your vehicle will be equipped with a TPMS reset button. Follow these steps to do it:

  1. Stop the vehicle and turn off the engine

    Tire pressure reset process cannot be done while the vehicle is moving.

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal

  4. Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.

    Each model year has a different button location
    toyota tire pressure tpms light reset

  5. Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.

    Done!

These instructions are based on the Scion iQ owner’s manual. This procedure should apply to the first generation of the Scion iQ (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article 2012-2015 Scion iQ Tire Pressure Sensor TPMS Light Reset Guide can solve your problem. Good Luck!