How To Reset Tire Pressure TPMS Light on Chevrolet Spark (2013-2021)

How To Reset Tire Pressure TPMS Light on Chevrolet Spark (2013-2021) – Chevrolet Spark is a Chevrolet A-segment hatchback. The Spark was presented in 2009 as the successor to the Chevrolet Matiz.

The Spark has been available in North America since 2012, with prices starting at $ 12,995 in the United States. From 2013 the Spark also appears as an EV. The Spark EV be available in California in the summer of 2013, with other markets to follow, including the Netherlands.

How To Reset Tire Pressure TPMS Light on Chevrolet Spark (2013-2021)

If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Spark, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.

2013-2015 Models

2016-2021 Models

Just like the previous model, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this latest Chevy Spark 2016 2017 2018 2019 2020 2021 model year. Depending on your vehicle trim level, there are 2 ways to do this. Here’s how to do it:

Base Level Display

• Turn the ignition key to the “ON” position without starting the engine
• Press the MENU button briefly until you see the REMAINING OIL LIFE on the display

• Scroll down to the “TIRE PRESSURE LEARN” menu
• Press and hold the SET/CLR button until the horn sounds twice
• Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
• Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
• Turn off the ignition after you reset the last tire
• Adjust the tire pressure in all four tires recommended on the tire placard

Uplevel Display

• Turn the ignition key to the “ON” position without starting the engine
• Press the MENU button briefly until you see the VEHICLE menu tab on the display
• Scroll down to the “TIRE PRESSURE” menu
• Press and hold the SET/CLR button until the horn sounds twice
• Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
• Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
• Turn off the ignition after you reset the last tire
• Adjust the tire pressure in all four tires recommended on the tire placard

These instructions are based on the Chevy Spark owner’s manual. This procedure should apply to the third and fourth generation of the Chevy Spark (2013 2014 2015 2016 2017 2019 2020 2021 model years). Hopefully, the article How To Reset Tire Pressure TPMS Light on Chevrolet Spark (2013-2021) can solve your problem. Good Luck!