Hey Buddy! Wazzup? This will be a short how-to post on how to reset the oil service light on a BMW X4 F26/G02. So in this content, I will tell you guys some tricks to get to the reset menu on this car.
Here we’ve got a 2017 BMW X4 M40i, and I’m just doing the service on it. So as soon as you start the car, we’ve got our service for 5,000 miles, and now we’re going to be resetting the service light.
For your info, this operation work for the first and second generations of the BMW X4 F26/G02 (2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 model years).
Table of Contents
Time needed: 3 minutes
We’re located inside the BMW X4 right now, and the vehicle key is located inside the interior as well, and the hood has to be closed. So let’s start the reset procedure.
The first thing you’re going to do is push the START button two times and the dash will completely illuminate and then all the warning lights will go out
The process has started somewhere at this point there’s a RESET button on the left-hand side of the instrument cluster and I’m going to push and hold it then the service menu will come up
When you’re inside the service menu you’ll let go of the button and you can hit it and cycle through all the vehicle services items. So you’re going to highlight the service that you want to reset
To reset it, you need to push and hold the button till it says reset with the question mark
After that, you’ll let go and then push and hold again and once the reset and progress bar comes up you can go ahead and let it finish till it says reset successfully
To reset the oil service light on the 2021 to 2024 BMW X4 is a little different from the previous model year. You need to use the BC button to do this. So the way you reset is.
Hit the START button three times rapidly and wait until Diagnostic Mode Active pops up on the display
After that, hold down the BC button on the turn signal lever for 15 seconds until you see the service menu
Now the next step, press the BC button repeatedly to find the ENGINE OIL menu
Once you get there, hold down the BC button until RESET appears on the screen
Finally, hold down BC button one more time and wait until the reset progress bar finishes and you’re done.
So that’s how you do BMW X4 Service Reset. I have seen sometimes it’ll say unsuccessful, and you may have just to repeat the process, but that is how you reset the service light. So thanks for stopping by, and I hope this content helps you out.
Hey what's up Bimmers! Owning a BMW M8 comes with the responsibility of proper maintenance,…
Greetings, fellow Bimmer lovers! Today, we have an exciting topic to delve into: how to…
What's up Bimmer! Welcome to our guide on resetting the oil service light on your…
Wassup Bimmers? When it comes to maintaining your BMW M4 F82/F83/G82/G83, resetting the oil service…
Hey, what's up Bimmers! Welcome to the comprehensive guide on performing an easy oil service…
Hi, Bimmers! In the fast-paced world of automotive technology, staying on top of routine maintenance…
This website uses cookies.
View Comments
Здравствуйте,у меня БМХ Х4 2017 почему то не получается сбросить ошибки в ручную.